|
 |
 |
|
|
|
Completed Domestic Flat Roofs Construction Pictures
The following picture show typical examples of completed domestic flat roofs, being fully bonded, mechanically attached and the ballasted system. Any flat roof construction is suitable for EPDM such as commercial applications like schools, offices and factories.
To enlarge the pictures below, please double click on the image
      
Garage Flat Roof Ballasted System Installation
The sequence of pictures below show a ballasted system being fitted to an old worn out leaking felt roof. In this instance, the old felt does not have to be removed thus saving labour and costs. The whole roof is first cleaned of any debris, chippings and loose material then the geotextile is rolled out to cover the whole base and secured by tacks or staples. The EPDM rubber membrane sheet is then pulled squarely over the entire roof and the overhangs draped down the sides. After about 10 – 15 minutes, after it has adjusted to the ambient temperature, it can be adhered down onto the facia boards and finished by fixing the aluminium edge trims round the perimeters.
|
|
|
Old felt roof to be renovated is swept clean of all debris and loose chippings
  |
Geotextile underlay being laid on the old felt and tacked into position
 |
Underlay fitted to
extents of the flat roof extending to all edges |
EPDM is now pulled over the full area of the roof and draped over all sides
  |
EPDM in position, with edge trims fitted and bags of ballast waiting to secure the membrane against wind
  |
|
|
|
|
|
|
 |
|
|
